PM VSD Screw Air Compressor

Only the Air You Need, Only the Energy You UseA fixed-speed compressor runs at full power all the time – even when your lines are idle. That's flooring the gas pedal while waiting at a red light. Our PM VSD matches motor speed to your real-time air demand: slow down when demand drops, speed up when you need more. You get stable pressure, lower energy bills, and a compressor that lasts longer because it works smarter, not harder. From a small workshop to a 24/7 factory, plug it in, set it, and forget it. Less noise. Less heat. Less maintenance. Just compressed air, exactly when you need it, without burning electricity you don't.

4-IN-1 PM VSD Screw Air Compressor

Compressor, Tank, Dryer, Filter – Everything in One BoxYou know how it usually goes: separate delivery for the compressor, another for the tank, then the dryer and filter show up on different trucks. Your floor plan gets eaten up by four different footprints, and your pipefitter spends half a day connecting everything. Not anymore. This unit bundles the screw compressor, air receiver tank, refrigerated dryer, and precision filter into a single, quiet enclosure. Open the crate, roll it into place, connect power, and walk away. Clean, dry compressed air comes out of one outlet – no extra piping, no leaks between components, no space wasted. And the PM VSD inside still matches motor speed to your demand, saving up to 30% on electricity. Need more air later? Add another Integrated 4 in 1 – same simplicity, twice the output. That’s a compressed air room that fits in a corner, runs silent, and doesn’t ask for attention.

Two Stages Screw Air Compressor

Achieve Higher Airflow with Lower Energy ConsumptionMost screw compressors do all the work in one step – squeezing air from atmospheric pressure all the way to 8 bar in a single pass. That’s hard on the machine and hard on your power bill. Two‑stage compression changes the game: the first stage compresses partway, the air cools down in between, then the second stage finishes the job. Lower internal temperatures mean less wear on bearings and screw elements, and up to 15% better efficiency than single‑stage units. Now add our PM VSD on top of that, and you’re matching motor speed to your actual air demand while every cubic meter takes less work to produce. Your electricity meter slows down. Your compressor runs cooler and quieter. For 24/7 high‑demand lines, this is the one that pays you back month after month. Simple thermodynamics, executed right.

Water-Lubricated Screw Compressor

Zero Oil, Zero Contamination, and Maximum ReliabilityMost screw compressors rely on oil for sealing and cooling – which means you constantly worry about oil carry‑over, filter replacements, and product contamination. Not this one. Our water‑lubricated design uses nothing but clean water between the rotors. No oil in the compression chamber, no oil in your air lines. That makes it the natural choice for pharmaceutical, food, electronics, and any plant where pure, Class 0 certified air is a must. Water also removes heat more efficiently, so the compressor runs cooler and quieter. And because there are no oil separators to change, maintenance is simpler and cleaner. For 24/7 critical production, this is the compressor that gives you peace of mind – and pure air, every second of the day.